I-Omron CPM1A CPM1A-40CDR-A-V1 Programmable Logic Controller PLC

I-Omron CPM1A CPM1A-40CDR-A-V1 Programmable Logic Controller PLC Umfanekiso obonisiweyo
  • I-Omron CPM1A CPM1A-40CDR-A-V1 Programmable Logic Controller PLC
  • I-Omron CPM1A CPM1A-40CDR-A-V1 Programmable Logic Controller PLC
  • I-Omron CPM1A CPM1A-40CDR-A-V1 Programmable Logic Controller PLC

Inkcazo emfutshane:

Imodeli: CPM1A40CDRAV1
Udidi lweMveliso: Abalawuli abaKhethekileyo
Uhlobo: I-Relay eCwangcisiweyo - iYunithi yeCPU
Isitayile sokuFaka: INtaba yeSitimela se-DIN
Ubungakanani: 150 mm x 90 mm x 70 mm
Uhlobo: Omron Automation kunye noKhuseleko
Inani lee-Inputs: 24
Inani leemveliso: 16
Uhlobo lwesiphumo: I-Relay
Uhlobo lweMveliso: Abalawuli
Uthotho: CPM1A
Ubungakanani bePakethi yeFektri: 1
Udidi olungaphantsi: Abalawuli
I-Voltage yoNikezelo – Ubuninzi: 240 VAC
I-Voltage yoNikezelo – Ubuncinci: 100 VAC
Iwaranti: Unyaka o-1


  • Ixabiso le-FOB:I-US $0.5 - 9,999 / Isiqwenga
  • Ubungakanani obuncinci be-oda:Iziqwenga ezili-100
  • Amandla okubonelela:Iziqwenga ezili-10000 ngenyanga

    • Singomnye wabathengisi be-FA abangochwephesha kakhulu eTshayina. Iimveliso zethu eziphambili ziquka i-servo motor, i-planetary gearbox, i-inverter kunye ne-PLC, i-HMI. Iimpawu ziquka iPanasonic, iMitsubishi, iYaskawa, iDelta, iTECO, iSanyo Denki, iScheider, iSiemens, i-Omron kunye nezinye; Ixesha lokuthumela: Zingadlulanga iintsuku ezi-3-5 zokusebenza emva kokufumana intlawulo. Indlela yokuhlawula: T/T, L/C, iPayPal, iWest Union, iAlipay, iWechat njalo njalo.

    I-Whatsapp

    Iinkcukacha zeMveliso

    Iithegi zeMveliso

    IINKCUKACHA NGOKUBANZI

    Uhlobo lokufaka Igalelo le-DC
    Uhlobo lweCPU Amanqaku ali-10 I/O Amanqaku angama-20 I/O Amanqaku angama-30 I/O Amanqaku angama-40 I/O
    Umbane wombane we-AC
    umbane we-DC rhoqo    		 I-100 ukuya kwi-240 VAC, 50/60 Hz
    24 VDC
    Uluhlu lwevolthi yokusebenza
    Umbane we-AC
    Umbane weDC    		 85 ukuya kwi-264 VAC
    85 ukuya kwi-264 VAC
    Ukutya umbane
    Umbane we-AC
    Umbane weDC    		 Ubuninzi be-VA obungama-30. Ubuninzi be-VA obungama-60.
    Ubuninzi be-6 W. Ubuninzi be-20 W.
    Umsinga wangoku 30 Ubuninzi. 60 Ubuninzi
    Umbane wangaphandle (i-AC kuphela)
    Umbane wombane
    Ukunikezwa Amandla
    umthamo wemveliso    		 24 VDC
    200 mA 300 mA
    Ukumelana nobushushu Imizuzu engama-20 MΩ kwi-500 VDC phakathi kwee-terminals ze-AC kunye ne-terminal yomhlaba ekhuselayo.
    Amandla e-dielectric I-2,300 VAC kwi-50/60 Hz umzuzu omnye kunye nomsinga wokuvuza we-10 mA max. phakathi kwazo zonke
    iiterminals ze-AC zangaphandle kunye nesiphelo somhlaba esikhuselayo.
    Ukumelana nengxolo Ihambelana ne-IEC61000-4-4, 2 kV (iintambo zombane)
    1500 Vp-p, ububanzi bepulse buyi-0.1 ukuya kwi-1 µs, ixesha lokunyuka: 1 ns (ngokusebenzisa isandi sokulinganisa)
    Ukumelana nokungcangcazela I-10 ukuya kwi-57 Hz enobukhulu obuyi-0.075 mm, kunye ne-57 ukuya kwi-150 Hz enokukhawuleza kwe-1.5 G ngaphakathi
    izikhokelo ze-X, Y, kunye ne-Z zemizuzu eli-10 nganye.
    Ukumelana nomothuko 147 m/s2 kwiindlela ze-X, Y kunye ne-Z izihlandlo ezi-3 nganye.
    Ubushushu obugciniwe
    Ukusebenza
    Indawo yokugcina izinto    		 0°C ukuya kuma-55°C (32°F ukuya kuma-131°F)
    --20°C ukuya kwi-75°C (--4°F ukuya kwi-167°F)
    Umswakama ongqongileyo
    Ukusebenza    		 I-10% ukuya kwi-90% ye-RH akukho manzi
    Indawo engqongileyo
    Ukusebenza    		 Akukho gesi irhabaxa
    Ubungakanani besikrufu sesiphelo M3
    Ixesha lokubamba umbane Imizuzu eli-10 kwimodeli ze-AC, kunye nemizuzu eli-2 kwimodeli ze-DC
    20235301054241053

    Isicelo

    Ii-micro controllers ze-CPM1A series zisombulula zombini usetyenziso olusisiseko noluncinci. Iimodeli zesitayile sezitena ziquka i-DC inputs/transistor okanye i-relay outputs ukuhlangabezana neemfuno zakho zoyilo. Isiseko se-I/O see-CPUs siqala kwi-10, 20, 30, kunye ne-40 I/O points kunye nokwandiswa okuphezulu ukuya kwi-100 I/O. Iimodyuli zokwandiswa ezikhethekileyo ziquka i-mixed analog I/O, i-temperature sensor inputs kunye nonxibelelwano olulandelelanayo.

    Itekhnoloji ye-PLC isetyenziswa kakhulu kwiindawo zolawulo lwemigca eyahlukeneyo yemveliso, efana neshishini leemoto, ishishini le-elektroniki, ukwenziwa koomatshini, njl. Imodyuli ye-PLC inokulawula ngokuzenzekelayo iinkqubo ezahlukeneyo zemveliso kumgca wemveliso, njengokuhlanganisa ngokuzenzekelayo, ukucubungula, ukupakishwa, ukuthuthwa, ukuhlolwa kunye neminye imisebenzi, ukuphucula ukusebenza kakuhle kwemveliso kunye nokunciphisa iindleko zabasebenzi. Umzekelo, kumgca wemveliso yokuwelda umzimba kwishishini leemoto, ukusetyenziswa kwe-PLC kunokulawula ngokuzenzekelayo kunye nokulungiswa kokuwelda komzimba, ukuphucula ukusebenza kakuhle kwemveliso kunye nomgangatho, kunye nokonga iindleko zabasebenzi.

    I-PLC ingasetyenziswa kwiinkqubo ezahlukeneyo zamandla, ezinje ngolawulo lwempompo yamanzi, ulawulo lokuveliswa kwamandla omoya, ulawulo lwamandla elanga, ulawulo lweseti yejenereyitha, njl.njl., ukufezekisa ukusetyenziswa kakuhle kwamandla kunye nolawulo oluzenzekelayo lweenkqubo zamandla. Umzekelo, ukusebenzisa i-PLC kulawulo lwephaneli yelanga kunokufezekisa ukulandelelwa ngokuzenzekelayo kwezixhobo zelanga kunye nolawulo oluzenzekelayo lweephaneli zelanga, kuphucule ukusetyenziswa kwamandla elanga, kwaye kunciphise iindleko zombane.

  • Ngaphambili:
  • Okulandelayo:

    • IMVELISO EZINXULUMENEYO